Table of Contents
Advertisement
7.9.3
Video Loss screen
Siemens AG
NOTE
For the Notify action, the notify item you select should be enabled in the Notification setup screen
and the DVR should be registered in the RAS (Remote Administration System).
6.
Highlight the desired box under the PTZ heading, and press the
Î
A list of PTZ presets appear.
7.
Select the preset position for each PTZ camera, where you want PTZ cameras
to move to whenever the DVR detects motion on the selected camera's input.
Î
You can save your Motion Detection changes by highlighting Save and
pressing the
button.
Î
Selecting Cancel exits the screen without saving the changes.
8.
Highlight Video Loss in the Event menu and press the
Î
The Video Loss setup screen appears.
Fig. 37
Video Loss Settings screen
Settings
9.
Highlight the box under the Video Loss Interval to set the duration of a signal
loss before the DVR will report a Video Loss.
Î
The DVR will not consider any signal loss from a camera to be a Video Loss if
the detected signal loss is shorter than the interval set on this screen.
10. Highlight the Actions tab.
Î
The Video Loss Actions screen displays.
Configuration
button.
button.
43
06.2010
Hide quick links:
Advertisement
Table of Contents
