Siemens SISTORE AX4 Lite 1000/100 Configuration & Operation Manual page 23

Siemens AG
Fig. 11 Schedule setup screen (Advanced Mode)
You can program the DVR to record only during certain times based on time, day of
the week, and holidays. The smallest time segment you can use is 15 minutes.
Highlighting Schedule On and pressing the
the Schedule On mode, the DVR records video based on the schedule established
in the Schedule screen. When turning Schedule recording Off, you will be asked to
confirm your decision, and
Panic recording will function even when Schedule is turned off.
panic recording.
Highlighting Schedule Mode and pressing the
Simple Mode and Advanced Mode. Selecting Advanced Mode allows you to set up
an individual recording schedule for each event.
1. Highlight the "+" and press the
2. Highlight the box under the Day heading and press the
days that the scheduled recording will take place.
Î
Choose from: Sun, Mon, Tue, Wed, Thu, Fri, Sat, M~F, Hol and All.
3. Highlight the box under the Range heading and press the
the time range that the scheduled recording will take place.
Î
The smallest time segment you can use is 15 minutes.
4. Highlight the box under the Mode heading and press the
the recording mode that will be used.
Î Choose from: No Record, Time, Event and Time & Event (Simple Mode only).
When the DVR is in the No Record mode, it will not record during the preset
day and time range as long as the Panic button is not pressed. Use the No
Record mode when you do NOT want the DVR to record during certain times.
When the DVR is in the Time mode, the
of the screen. The DVR will record and displays the
corner of the screen during the scheduled times.
button toggles between On and Off. In
displays at the top-left corner of each camera screen.
button allows you to select between
button to add a schedule item.
icon displays at the top-left corner
Configuration
displays during
button to change the
button to change
button to change
icon at the top-left
23
06.2010