Frame-By-Frame Playback (P2 Card / Tape); Clip Skip (P2 Card); End Search (Tape) - Panasonic AG-HVX200AP Operating Instructions Manual

Frame-by-frame playback (P2 card / Tape)

1
Press the button during playback to set
the unit to the pause mode.
2
Press the PAGE/AUDIO MON/VAR button to
play frame-by-frame.
On the remote control unit, press the STILL
ADV ( or ) button.
• Press and hold the button to perform frame-
by-frame play continuously.
PAGE/
AUDIO MON/VAR
Camera or Remote control
Press the button to return to normal playback.

Clip skip (P2 card)

1
During playback, press the
pause the camera.
2
Press the (backward) or
button.
Camera or Remote control
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX INDEX STOP STOP INDEX
button to
(forward)
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX INDEX STOP STOP INDEX

End search (Tape)

You can find unrecorded parts or the end of the
last scene shot.
1
In the setup menus, OTHER FUNCTIONS
screen, END SEARCH, set the search
method. (Page 116)
BLANK: Find unrecorded parts.
REC END: Find the end of the last scene shot.
2
When in the VCR mode
Press the END SEARCH button.
• The unrecorded parts are found, and an
unrecorded blank on the tape is found, and a
still picture several seconds before the blank
is displayed.
When in the camera mode
Press and hold the END SEARCH button for
at least a second.
• A blank portion of the tape is found, and
an unrecorded blank on the tape is found,
and the pause status is established several
seconds before the blank.
• If you change the tapes, the camera will not be
able to find the end of the last scene shot even if
you have set REC END.
• If the tape is blank, searching stops at the end of
the tape.
• This function may not work properly if there are
blank parts near the beginning of the tape or part
way through the tape.
• Before recording, check the still picture first.
END SEARCH
75