Panasonic AG-HVX200AP Operating Instructions Manual page 92

Screen displays (continued)
3 AUTO/MANUAL switch operation display
This display appears if a function which has
been set on the setting menu AUTO SW screen
is operating when the AUTO/MANUAL switch
has been pressed.
4 Backup unit displays
The status of the backup unit connected to the
1394 connector is displayed here.
Nothing is displayed if in the setup menus,
OTHER FUNCTIONS screen, 1394 CONTROL,
you have selected "OFF".
1394 : Recording
1394 : Recording standby
1394 : The backup unit cannot be controlled.
1394 : The backup unit is not connected.
1394- - : The backup unit is connected but is
in a mode other than recording or
recording standby.
5 Recording format (P2 card) (Page 107)/
recording time (tape) display
6 1394TC display
Appears when the 1394 IN PRESET option on
the setting menu RECORDING SETUP screen
is ON. However, it does not appear when the
FIRST REC TC item is REGEN. (This appears
in the MCR/VCR mode.)
7 Information display
Following information is displayed depending
on the situation.
• Performance of the auto white balance or the
auto black balance
• Warning (Page 94)
• The functions allocated to the USER buttons
are displayed while you hold down the DISP/
MODE CHK button.
8 Squeeze information
Appears when in the setup menus, CAMERA
SETUP screen, ASPECT CONV, you have
selected "SQUEEZE" (page 103) or when
playing back images recorded in the squeeze
mode.
9 Mic level auto control
Appears when in the setup menus,
RECORDING SETUP screen, MIC ALC, you
have selected "ON".
10 AWB error
LOWLIGHT:
Appears when the brightness level adjusted by
the auto white balance is too low.
92
11 Marker luminance display
When markers are displayed, the brightness
level around the center of the screen is
indicated as 0% to 99%. "99%↑" appears if the
percentage is over 99.
12 Calendar
Month:
JAN (January), FEB (February), MAR (March),
APR (April), MAY (May), JUN (June), JUL
(July), AUG (August), SEP (September), OCT
(October), NOV (November), DEC (December)
mmm dd yyyy hh:mm:ss
13 Recording/playback frame rate display
Apart from the case of 720/30PN and
720/24PN, only the recording frame rate is
displayed.
14 Audio sampling frequency (Tape only)
15 Shutter speed
The shutter speed is displayed here.
16 Audio level meter (Page 54)
17 Auto iris control displays
STD
: Standard auto-iris control
SPOT : Auto iris control for spotlight
BACK : Auto iris control for backlight
compensation
18 IRIS display
Displays F value.
The F value during shooting is also displayed
during playback when ON was selected under
CAMERA DATA of the setting menu DISPLAY
SETUP screen.
19 Zoom position display
The zoom poison is displayed with Z00
(maximum wide-angle) - Z99 (maximum zoom).
The unit can be switched to mm in the
ZOOM•FOCUS option of the setting menu
DISPLAY SETUP screen.
Day of the month
Year:
2000 - 2030
Hours
Minutes
Seconds