Camera Setup Screen - Panasonic AG-HVX200AP Operating Instructions Manual

SCENE FILE screen (continued)
Display
Item
mode
SKIN TONE DTL (Camera) Sets the skin tone details. Select ON to reduce the skin tone details and soften
P2 TAPE
V DETAIL FREQ (Camera) Sets the vertical detail for shooting in 480i progressive mode.
P2 TAPE
NAME EDIT (Camera) Edits the name of the selected scene file you have selected with the scene file
P2 TAPE
SAVE/INIT (Camera) SAVE:
P2 TAPE

CAMERA SETUP screen

Display
Item
mode
ASPECT CONV (Camera) Selects the aspect ratio of the image you record in 480i format. This item cannot
P2 TAPE
SETUP (P2) (Camera) Switch the setup level of video signals in 480i format using a P2 card.
P2
SETUP (TAPE) (Camera) Switch the setup level of video signals in 480i format using a tape.
TAPE
the skin tone.
ON OFF
THIN: Makes the detail thin.
MID: Makes the detail slightly thicker.
THICK: Makes the detail thicker.
When images were shot in the progressive mode in which the vertical detail is
set as "THIN" or "MID" and are played on a monitoring television (60i interlace),
you will see flickers caused on horizontal lines and almost horizontal oblique
lines. When playing back images in the progressive mode or when editing
images or performing other postprocessing, images with a higher resolution will
be obtained with the THIN or MID setting than with the THICK setting.
dial.
Saves the changed scene file settings.
• The settings will not be saved if you exit the menu mode, switch to the MCR/
VCR mode or turn the camera off without selecting SAVE.
INITIAL:
The settings of the scene file selected with the scene file dial are returned to
the factory settings.
be selected when the 1080i or 720P recording format is used. (Page 44)
NORMAL
LETTER BOX
SQUEEZE
0%:
Setup is switched to 0% for both the camera output and the recording.
7.5%A:
Setup is switched to 7.5% for the camera output and 0% for the recording.
0%:
Setup is switched to 0% for both the camera output and the recording.
7.5%:
Setup is switched to 7.5% for both the camera output and the recording.
Description of settings
Description of settings
indicates the factory setting.
103