Panasonic AG-HVX200AP Operating Instructions Manual page 114

Setup menu list (continued)
DISPLAY SETUP screen (continued)
Item
ZOOM · FOCUS
P2 TAPE
CARD/TAPE · BATT
P2 TAPE
OTHER DISPLAY
P2 TAPE
CAMERA DATA
P2 TAPE
LCD BACKLIGHT
P2 TAPE
LCD SET
P2 TAPE
EVF SET
P2 TAPE
SELF SHOOT
P2 TAPE
EVF MODE
P2 TAPE
DISPLAY ASPECT
P2 TAPE
EVF COLOR
P2 TAPE
114
Display
mode
(Camera) Selects the unit of zoom and focus values.
OFF, NUMBER, mm/feet, mm/m
<Note>
Use the mm/feet or mm/m display only as a general guideline since it is not
entirely accurate.
(Camera)
Select ON to display the remaining card/tape and battery charge.
(MCR/ ON OFF
VCR)
(Camera)
Select how much information to display on the screen. (Page 96)
(MCR/ OFF, PARTIAL, ALL
VCR)
(MCR/
Select ON to display the camera settings (such as image stabilizer, F-number,
VCR)
and gain value) during tape playback.
ON OFF
<Note>
In the P2 mode, this item appears only when 480i REC MODE has been set to
DV. (Page 107)
(Camera) Adjusts the backlight of the LCD monitor. Select HIGH for brighter backlight.
(MCR/ HIGH NORMAL
VCR)
(Camera) Adjusts the display level of the images on the LCD monitor. (Page 23)
(MCR/ LCD COLOR LEVEL
VCR) LCD BRIGHTNESS
LCD CONTRAST
(Camera) Adjusts the display level of the images on the viewfinder. (Page 23)
(MCR/ EVF COLOR LEVEL
VCR) EVF BRIGHTNESS
EVF CONTRAST
(Camera) Selects the LCD mirror mode for self-portrait shooting. Select MIRROR to
reverse left and right at self-portrait shooting. (Page 42)
NORMAL
(Camera)
Selects the LCD monitor and the viewfinder display setting.
(MCR/ ON:
VCR) Images always appear on the viewfinder.
AUTO:
Images do not appear on the viewfinder when the LCD is open.
(Camera) Selects the aspect ratio of the LCD monitor and the viewfinder.
(MCR/ AUTO: Changes automatically to the appropriate ratio according to the
VCR)
recording or play mode information.
4:3 :
Fixed at 4:3.
<Note>
Black bands appear at the top and bottom of the screen when images are
displayed at a 16:9 aspect ratio. No parts of the images are missing.
(Camera) Selects color or black and white images on the viewfinder.
(MCR/ ON: Color
VCR) OFF: Black and white
Description of settings
MIRROR
indicates the factory setting.