Replacing A Fuse - Yamaha Apex RX10GTY Owner's Manual

Table of Contents

Advertisement

ESU12332

Replacing a fuse

EWS00550
WARNING
Be sure to use the specified fuse. A wrong
fuse could cause electrical system dam-
age or A FIRE HAZARD.
ECS00631
NOTICE
Be sure to turn the main switch to the off
position and disconnect the negative bat-
tery lead to prevent accidental short-cir-
cuiting.
1.
Remove the shroud, the left and right
side covers, and the top cover. (See page
41 for removal procedures.)
2.
Remove the headlight unit bolts, discon-
nect the headlight couplers and speed-
ometer coupler, and then remove the
headlight unit.
1. Headlight unit bolt
3.
Unhook the air filter case fastener and
disconnect the air temperature sensor
coupler.
Periodic maintenance and adjustment
1. Fastener
2. Air temperature sensor coupler
4.
Loosen the joint clamp bolts.
1. Joint clamp bolt
5.
Slide the clamps away from the air filter
case, and then disconnect the crankcase
breather hose and the bypass air hose.
1. Crankcase breather hose clamp
2. Bypass air hose clamp
3. Crankcase breather hose
4. Bypass air hose
6.
Slide the clamp down, and then discon-
nect the air filter case drain hose.
67

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Apex rx10ltgty

Table of Contents