Yamaha Apex RX10GTY Owner's Manual page 75

Specified fuses:
Main fuse:
40.0 A
Fuel injection system fuse:
10.0 A
"HEAD" (headlight) fuse:
20.0 A
"SIG" (signal) fuse:
10.0 A
"DC TERM" (auxiliary DC jack) fuse:
3.0 A
"IGN" (ignition) fuse:
20.0 A
"BACK UP" (backup) fuse:
3.0 A
"FAN" (radiator fan) fuse:
4.0 A
"ECS" (electronically controlled rear
shock absorber) fuse:
10.0 A
Spare fuses:
20.0 A, 10.0 A, 4.0 A, 3.0 A
10. Connect the negative battery lead.
11. Install the air filter case by reversing the
removal steps.
12. Connect the headlight couplers and
speedometer coupler, and then install the
headlight unit, making sure to insert the
projections on the headlight unit stay into
the slots on the bottom of the headlight
unit.
13. Install the headlight unit bolts, and then
tighten them to the specified torque.
Periodic maintenance and adjustment
Headlight unit bolt tightening torque:
3 Nm (0.3 m·kgf, 2.2 ft·lbf)
14. Install the top cover, the left and right side
covers, and the shroud.
TIP
If the fuse immediately blows again, ask a
Yamaha dealer to inspect the snowmobile.
69