Specifications - Yamaha Apex RX10GTY Owner's Manual

Specifications

ESU12465
Dimensions:
Overall length:
RX10GT 2805 mm (110.4 in)
RX10LTGT 3000 mm (118.1 in)
Overall width:
1225 mm (48.2 in)
Overall height:
1160 mm (45.7 in)
Dry weight:
RX10GT 261.0 kg (575 lb)
RX10LTGT 271.0 kg (597 lb)
Ski stance:
1086 mm (42.8 in)
Engine:
Type:
Liquid cooled 4-stroke, 20 valves
Cylinder arrangement:
Backward-inclined parallel 4-cylinder
Displacement:
998.0 cm³
Bore × stroke:
74.0 × 58.0 mm (2.91 × 2.28 in)
Idling speed:
1400–1600 r/min
Engine oil:
Recommended grade:
API service SG type or higher, JASO
standard MA
Type:
YAMALUBE 4 0W-30, SAE 0W-30
Fuel injection:
Model × quantity:
39EIDW × 2
Manufacturer:
MIKUNI
Fuel:
Type:
REGULAR UNLEADED GASOLINE
ONLY
Minimum pump octane (R+M)/2:
86
Starting system:
Electric starter
Chassis:
Drive track:
Material:
Molded rubber, fiberglass-rod reinforced
76
Type:
Internal drive type
Width:
381 mm (15.0 in)
Deflection:
RX10GT 30.0–35.0 mm (1.18–1.38 in)
RX10LTGT 25.0–30.0 mm (0.98–1.18 in)
Length on ground:
RX10GT 768 mm (30.2 in)
RX10LTGT 960 mm (37.8 in)
Rear suspension:
Type:
Slide rail suspension
Track sprocket wheel:
Material:
Polyethylene
Number of teeth:
9
Transmission:
Clutch type:
Automatic centrifugal engagement
Overall reduction ratio:
RX10GT 6.02–1.58 :1
RX10LTGT 6.28–1.65 :1
Sheave distance:
267.0–270.0 mm (10.51–10.63 in)
Sheave offset:
13.5–16.5 mm (0.53–0.65 in)
Engagement speed (Subject to change
according to elevation settings.):
3300–3700 r/min
Shift speed [Subject to change according to
elevation settings. Usually achieved after
approximately 800 m (0.5 mi) traveled.]:
10250–10750 r/min
Drive chain type:
Silent chain enclosed in oil bath
Drive chain housing oil:
Type:
SAE 75W or 80W API GL-3 Gear oil
Capacity:
0.25 L (0.26 US qt, 0.22 Imp.qt)
Reverse system:
Yes
Primary reduction ratio:
3.80–1.00 :1
Secondary reduction ratio:
RX10GT 38/24 (1.58)
RX10LTGT 38/23 (1.65)