Table of Contents
Advertisement
Control functions
1. Thumb warmer adjustment switch
TIP
The grip warmer, rear shock absorber com-
G
pression damping, and thumb warmer lev-
els are displayed for 5 seconds after
releasing the corresponding adjustment
switch, then the display switches to the fuel
meter.
The top segment of the fuel meter, grip
G
warmer level indicator, rear shock absorber
compression damping level indicator, and
thumb warmer level indicator flashes once
when the corresponding adjustment reach-
es the maximum level. The bottom segment
of the fuel meter, grip warmer level indica-
tor, rear shock absorber compression
damping level indicator, and thumb warmer
level indicator flashes once when the corre-
sponding adjustment reaches the minimum
level.
When the engine is started, the grip warm-
G
er, rear shock absorber compression
damping, and thumb warmer levels are set
to the levels selected when the engine was
stopped.
To adjust the grip warmer temperature
1.
Push the "MODE" button and make sure
that the grip warmer indicator is dis-
played. If the rear shock absorber indica-
14
tor is displayed, push the "MODE" button
again to display the grip warmer indica-
tor.
1. Grip warmer indicator "
2. Rear shock absorber indicator " "
2.
To raise the temperature, press the grip
warmer/rear shock absorber compres-
sion damping adjustment switch to "HI",
and to lower it, press the switch to "LO".
To adjust the rear shock absorber compres-
sion damping level
1.
Push the "MODE" button and make sure
that the rear shock absorber indicator is
displayed. If the grip warmer indicator is
displayed, push the "MODE" button again
to display the rear shock absorber indica-
tor.
1. Rear shock absorber indicator " "
"
Hide quick links:
Advertisement
Table of Contents
