Yamaha Apex RX10GTY Owner's Manual page 32

Control functions
2. Loosen the locknut.
1. Locknut
2. Control rod adjuster
3. To increase weight transfer, turn the ad-
juster in direction (a), and to decrease
weight transfer, turn it in direction (b).
WARNING! Never adjust the control
rod beyond the range of the scale on
the special wrench, otherwise the con-
trol rod could be damaged, which
could lead to an accident or injury.
[EWS00181]
4. Tighten the locknut while holding the ad-
juster in place. NOTICE: Make sure that
the special wrench is positioned at a
right angle to the control rod, and that
it is tightly fitted on the locknut or the
control rod adjuster.
Locknut tightening torque:
35 Nm (3.5 m·kgf, 25 ft·lbf)
26
[ECS00322]