Replacing A Fuse - Yamaha FX Nytro FX10D Owner's Manual

ECS00843
NOTICE
To charge a VRLA (Valve Regulated
●
Lead Acid) battery, a special (constant-
voltage) battery charger is required. Us-
ing a conventional battery charger will
damage the battery.
Do not charge the battery quickly.
●
ESU12874

Replacing a fuse

EWS00550
WARNING
Be sure to use the specified fuse. A wrong
fuse could cause electrical system dam-
age or A FIRE HAZARD.
ECS00631
NOTICE
Be sure to turn the main switch to the off
position and disconnect the negative bat-
tery lead to prevent accidental short-cir-
cuiting.
The main fuse, the fuel injection system fuse,
and the fuse box are located behind the right
side cover. (See page 63 for right side cover
removal procedures.)
1. Remove the shroud and the right side
cover. (See page 63 for removal proce-
dures.)
2. Disconnect the negative battery lead.
1
1. Negative battery lead
Periodic maintenance and adjustment
3. Replace the blown fuse with one of the
proper amperage.
1. Main fuse
2. Spare fuse
3. Fuel injection system fuse
1. "IGN" (ignition) fuse
2. "S/H" (helmet shield heater jack) fuse (CAN-
ADA)
3. "FAN" (radiator fan) fuse
4. "SIG" (signaling system) fuse
5. "DC TERM" (auxiliary DC jack) fuse
6. "HEAD" (headlight) fuse
7. Spare fuse
1 2 3 4 5 6
7
91