Table 5-10 Speed Selections; Table 5-11 Data Selections - Garmin GTX 330 Installation Manual

5.2.9 ARINC 429 Configuration Pages
ARINC 429 INPUT
The ARINC 429 INPUT Pages configure the ARINC 429
input ports. Each port can be configured independently for
the desired function(s). The ARINC 429 IN 1 INPUT allows
automated start and stop of the flight timer and places the
transponder in ground (GND) mode upon landing. The same
input data source cannot be selected for multiple input channels 1 through 3. ADLP is included for future
use.
For a connection to a Garmin GTS 820 or GTS 850, GARMIN TAS (HIGH) must be selected. Barometric
data is not included in the GARMIN TAS format. A separate barometric data source is required
SPEED (Channel 1 – 3)
SELECTION
Low
High
DATA (Channel 1 – 4)
CHANNEL SELECTION
All OFF
GPS
ADC NO ALT
ADC W/ALT
AHRS
EF/AD NO ALT
1
through
EF/AD W/ALT
3
GRMN DISPLAY Same as GPS with added ability of receiving phase of flight data
GRMN TAS
GRMN 743A*
4 ADLP
*The GRMN 743A ARINC 429 Input format does not fully support Version 2 ADS-B Out compliance
with AC 20-165. For full compliance to AC 20-165, the RS-232 REMOTE input format must be used
with a compatible GPS WAAS position source
190-00207-02
Rev. U

Table 5-10 Speed Selections

Standard low-speed ARINC 429 (nominally 12.5 kilobits per second)
High-speed ARINC 429 (nominally 100 kilobits per second)

Table 5-11 Data Selections

No unit connected to this ARINC 429 input
Selected waypoint information and GPS ground speed recognition.
Temperature and speed information
Altitude, temperature and speed information
Attitude and heading information
Selected course, heading, temperature, joystick waypoint and
speed information
Selected course, heading, temperature, joystick waypoint and
speed information plus altitude data
from a Garmin 400/500 Series (non-WAAS)
TAS Mode data from Garmin GTS 820 and GTS 850
Standard GNSS input. Includes position, velocity, and integrity
data.
Airborne Data Link Processor. ADLP is available only on channel
4.
(Section
ARINC 429 INPUT (First) Page
ARINC 429 INPUT (Second) Page
DESCRIPTION
DESCRIPTION
5.2.10).
GTX 330/330D Installation Manual
Page 5-11