Figure 2 Installing the OAW-AP120 series Access Point on a Wall
3. On the OAW-AP121 or OAW-AP125, orient the antennas. For best performance, swivel the antennas
so that they are oriented vertically, preferably in the same plane, parallel to the wall (see
Figure 3 Antenna Orientation on a Wall-Mounted OAW-AP121/OAW-AP125
On the OAW-AP120 or OAW-AP124, install the external antennas according to the manufacturer's
instructions, and connect the antennas to the antenna interfaces on the AP (see
Figure 4 Antenna Interfaces on the OAW-AP120/OAW-AP124
Using the Integrated Ceiling Tile Rail Slots
The snap-in tile rail slots on the rear of the AP can be used to securely attach the device directly to a 15/
16" wide, standard ceiling tile rail.
!
CAUTION
Alcatel-Lucent OAW-AP120 Series Indoor Access Point
Make sure the AP fits securely on the ceiling tile rail when hanging the device from the ceiling,
because poor installation could cause it to fall onto people or equipment.
| Installation Guide
Figure
ap
Figure
3).
4).
5