Table of Contents
Advertisement
Electrical
Power:
N O T E
Wireless LAN
Network Standards: IEEE 802.11b, IEEE 802.11g, IEEE 802.11a, and IEEE 802.11n
Antenna Type:
Antenna Gain (Integrated Antennas):
Radio Technology:
Radio Modulation Type:
Media Access Control: CSMA/CA with ACK
Supported Frequency Bands 2.4GHz:
Supported Frequency Bands 5GHz:
10
Ethernet:
2 x 100/1000 Base-T auto-sensing Ethernet RJ-45 Interfaces
MDI/MDX
IEEE 802.3 (10Base-T), IEEE 802.3u (100Base-T). IEEE 802.3ab (1000Base-T)
Power over Ethernet (IEEE 802.3af compliant), 48V DC/200mA (see
configuration)
5 VDC power interface, supports powering through an AC-to-DC mains electric power adapter
If a power adapter other than the one provided by Alcatel-Lucent is used in the US or
Canada, it should be cULus (NRTL) Listed, with an output rated 5 VDC, minimum 4A,
marked "LPS" or "Class 2," and suitable for plugging into a standard power receptacle in the
US and Canada.
POE support on Ethernet ports:
– 802.3af-compliant POE sourcing devices
– POE+ (56 V @ 350 mA)
Integrated 802.11a/b/g/n omni-directional high-gain antenna
Detachable 802.11a/b/g/n omni-directional high-gain antenna
2.4 – 2.5 GHz/3.2 dBi (max)
5.180 – 5.825 GHz/5.2 dBi (max)
Orthogonal Frequency Division Multiplexing (OFDM)
Direct Sequence Spread Spectrum (DSSS)
802.11b - CCK, BPSK, QPSK
802.11g - CCK, BPSK, QPSK,16-QAM, 64-QAM
802.11a - BPSK, QPSK,16-QAM, 64-QAM
802.11n draft 2.0
2.400 ~ 2.4835GHz (Global), channels country specific
5.150 ~ 5.250GHz (low band), country-specific
5.250 ~ 5.350GHz (mid band), country-specific
5.470 ~ 5.725GHz (Europe), country-specific
5.725 ~ 5.825GHz GHz (high band), country-specific
Alcatel-Lucent OAW-AP120 Series Indoor Access Point
Table 1
for pin
| Installation Guide
Advertisement
Table of Contents
