Removing The Battery And Uim/Microsd Card - Zte MTAG 281 User Manual

2. Hold the UIM card with the cut corner oriented as shown and slip it into the card
holder.
3. Open the microSD card holder, hold your microSD card with the cut corner ori-
ented as shown and slide it in.
microSD logo is a trade mark of the SD Card Association.
30
4. Insert the battery by aligning the gold contacts on the battery with the gold con-
tacts in the battery compartment. Gently push down on the battery until it clicks
into place.
5. Press the cover gently back into place until you hear a click.

Removing the Battery and UIM/microSD Card

1. Make sure that your mobile phone is off.
2. Remove the back cover.
3. Lift the battery up and out.
4. Slide the UIM card out.
5. Open the microSD card holder, slide the microSD card down gently and remove
it.
31