Packard Bell dot s series Service Manual page 113

ShinEtsu 7762
•
The following thermal pads are approved for use:
1. Eapus XR-PERemove all traces of thermal grease from the CPU using a lint-free cloth or cotton swab and
Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2. Apply a small amount of thermal grease to the centre of the CPU—there is no need to spread the grease
manually, the force used during the installation of the Thermal Module is sufficient.
3. Align the screw holes on the Thermal Module and Mainboard and lower the module into place. Keep the
module as level as possible to spread the thermal grease evenly.
4. Tighten the three (3) captive screws in numerical order: 1, 2 then 3.
Step
Thermal Module
5. Connect the thermal module cable to the mainboard.
Chapter 3
Downloaded from LpManual.com Manuals
3
Size
M2*3
1
2
Quantity
4
Screw Type
103