Panasonic HDC-HS100P Operating Instructions Manual page 60

Function
HD hi-speed burst
shooting
60
VQT1T93
72 still pictures are recorded at a rate of 24 per second.
Use this function to record an object with fast movement.
≥ The Intelligent auto mode is set to [OFF]. (l 51)
1
Select the menu. (l 29)
[RECORD SETUP] # [HI-SPEED BURST] # [ON]
2
Press the
≥ Up to 72 still pictures can be taken in burst mode. ([
red during recording.)
3
Select the setting to save with the cursor
button and press the cursor button.
[REC ALL]:
All pictures are stored.
[SELECT]:
Pictures in the selected range are stored.
[DEL ALL]:
No picture is stored.
≥ Select the thumbnail on the right bottom of the screen with the
cursor button and move the cursor button right to display the next
page.
4
(Only when the [SELECT] is selected)
Select the range of pictures that will be stored.
*
A Start point
B Finish point
* Only select the picture for start point if only 1 picture is to be
stored.
Confirmation message is displayed when [REC] is selected and the
cursor button is pressed after selecting the start point and the finish
point.
Select [YES] and press the cursor button.
Effect/Setting method
button.
] flashes in