Remote Control Usable Range - Panasonic HDC-HS100P Operating Instructions Manual

High definition video camera
Hide thumbs Also See for HDC-HS100P:
Table of Contents

Advertisement

Install a button-type battery (supplied)
1
While pressing
the stopper A,
pull out the
battery holder.
2
Set the button-
type battery
with its (i) mark
facing upward
and then put the
battery holder
back in place.
≥ When the button-type battery runs down,
replace it with a new battery (part number:
CR2025). The battery should normally last
about 1 year, however this depends on how
frequently the unit is used.
≥ Keep the button-type battery out of reach of
children to prevent swallowing.
Replace battery with Panasonic PART NO.
CR2025 only. Use of another battery may
present a risk of fire or explosion.
Caution: Battery may explode if mistreated.
Dispose of used battery promptly. Keep away
from children.
Do not recharge, disassemble or dispose of in
fire.

∫ Remote control usable range

A Remote control sensor
Distance: Within approx. 5 m (16 feet)
Angle: Approx. 10o up and 15o down, left, and
right
≥ The remote control is intended for indoor
operation. Outdoors or under strong light, the
unit may not operate properly even within the
usable ranges.
21
VQT1T93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents