Playback - Panasonic DVX100B Operating Instructions Manual

Playback

1
Set the POWER switch to ON.
2
Press the CAMERA/VCR button to switch to
VCR mode.
Basic operations
Tape protection mode
If you pause the camera-recorder for 5 minutes during play or shooting, it automatically stops to protect the tape.
The mode activates faster if it is cold.
48
CAMERA
VCR
Operation by the OPERATION lever
While the tape is in the stop mode, turn the lever in the direction q to play
back.
During playback, turn the lever in the direction q to use the variable
speed search mode (Page 51), then playback with the speed of 1x will
start. (The audio will not be played back.)
Variable speed search will not start if you are using the remote control.
While the tape is in the stop mode, turn the lever in the direction y to
fast forward the tape.
During play, move the lever y to play the tape at 10x speed.
While the tape is in the stop mode, turn the lever in the direction t to
rewind the tape.
During play, move the lever t to rewind the tape at 10x speed.
Turn the lever in the direction g to stop the tape.
While the tape is playing back, press this lever to set the camera-recorder
to the playback pause mode.
3
Use the OPERATION lever and the supplied
remote control to perform the common
playback operations (see below).
Remote control
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX STOP
INDEX STOP INDEX
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX INDEX STOP STOP INDEX
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX INDEX STOP STOP INDEX
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX INDEX STOP STOP INDEX
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX STOP
INDEX STOP INDEX