Table of Contents
Advertisement
Using scene files (continued)
6
The screen below is displayed, so set the file
name of six letters using OPERATION lever.
Set the same as user information (Page 27).
• Characters that can be set
Space, A to Z, 0 to 9, : ; < = > ? @ [ \ ] ^_-/.
PUSH ME U TO RETUR
7
After you finish setting the filename, press the
MENU button.
8
Move the OPERATION lever r to select SAVE/
INIT.
SCENE F1:-
GAMMA
KNEE
MATRIX
SKIN TONE DTL
V DETAIL FREQ
PROGRESSIVE
NAME EDIT
SAVE/INIT
PUSH MENU TO RETURN
9
Press the OPERATION lever (h) (or move it
y) then move it r to select YES.
SCENE F1:-
GAMMA
KNEE
MATRIX
SKIN TONE DTL
V DETAIL FREQ
PROGRESSIVE
NAME EDIT
SAVE/INIT
PUSH MENU TO RETURN
46
AME EDIT
W PO ITION F1
+
: PU H PLAY
-
: PU H TOP
EL
: PU H REW/FF
NORMAL
AUTO
NORMAL
OFF
OFF
NORMAL
AUTO
NORMAL
OFF
OFF
YES
10
The following screen appears, so press the
OPERATION lever (h).
FILE F1:
SAVE
INITIAL
PUSH MENU TO RETURN
11
The following screen appears, so move the
OPERATION lever e to select YES, then press
the OPERATION lever (h).
FILE F1:
SAVE?
YES
NO
12
Ten beeps sound in succession, the message
below appears, and the changes to the scene
file are complete.
COMPLETED !
13
Press MENU three times to exit the menus.
• The original scene file settings will be restored
when the menu mode is released, the
operation is switched to the VCR mode or
when the power is turned off if SAVE has not
been selected.
• To return the scene file settings to the factory
settings, select INITIAL in step 10, then do
steps 11 to 13.
___
PUSH STILL
SAVE
Advertisement
Table of Contents
