Cradlepoint ARC CBA850 Product Manual page 92

CBA850 | USER MANUAL Firmware version 5.4.0
CRADLEPOINT
Enable IPv6 and select the desired IPv6 connection method for this WAN interface.
• Disabled (default) – IPv6 disabled on this interface.
• Auto – IPv6 will use automatic connection settings (if available).
• Static – Input a specific IPv6 address for your WAN connection. This is provided by the ISP if it is supported.
• 6to4 Tunnel (http://en.wikipedia.org/wiki/6to4) – Encapsulates the IPv6 data and transfers it to an automatic tunnel provider
(if your ISP supports it).
• 6in4 Tunnel (http://en.wikipedia.org/wiki/6in4) – Encapsulates the IPv6 data and sends it to the configured tunnel provider.
• 6rd Tunnel (IPv6 rapid deployment: http://en.wikipedia.org/wiki/IPv6_rapid_deployment) – Encapsulates the IPv6 data and
sends it to a relay server provided by your ISP.
When you configure IPv6, you have the option to designate DNS Servers and Delegated Networks. Because of the dual-stack
setup, these settings are optional: when configured for IPv6, the router will fall back to IPv4 settings when necessary.
DNS Servers
Each WAN device is required to connect IPv4 before connecting IPv6. Because of this, DNS servers are optional, as most IPv4 DNS
servers will respond with AAAA records (128-bit IPv6 DNS records, most commonly used to map hostnames to the IPv6 address of
the host) if requested. If no IPv6 DNS servers are configured, the system will fall back to the DNS servers provided by the IPv4
configuration.
Delegated Networks
A delegated network is an IPv6 network that is inherently provided by or closely tied to a WAN IP configuration. The IPv6 model is
for each device to have end-to-end IP connectivity without relying on any translation mechanism. In order to achieve this, each client
device on the LAN network needs to have a publicly routable IPv6 address.
© 2015 CRADLEPOINT, INC. PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/ FOR MORE HELP AND RESOURCES PAGE 90