Cradlepoint ARC CBA850 Product Manual page 16

CBA850 | USER MANUAL Firmware version 5.4.0
CRADLEPOINT
DC Power Port: Attach the included power supply.
Reset: Return your CBA850 to factory default settings by pressing and holding the Reset button. This button is recessed, so it requires
a pointed object such as a paper clip to press. Press and hold for 10 seconds to initiate reset. This erases configuration changes and
resets the administrator password to the Default Password found on the product label.
USB Modem Port: The CBA850 has one USB 3.0 port, which supports the following features:
• USB Modem
• USB to Ethernet Adapter for WAN connectivity via modem emulation
• Logging to attached USB stick
• 5V Power over USB
Console Port: Used for Out-of-Band Management (OOBM) when connected to console port of connected device. Refer to the following
table for a pinout of the CBA850 Console Port:
Pin
1
2
3
4
5
6
7
8
© 2015 CRADLEPOINT, INC.
CP Console RJ45
Function
RTS
NC
TX
GND
GND
RX
NC
CTS
PLEASE VISIT HTTP://KNOWLEDGEBASE.CRADLEPOINT.COM/
Direction
O
O
I
I
FOR MORE HELP AND RESOURCES PAGE 14