Furuno FCV-295 Installation Manual page 4

CAUTION
Ground the equipment to
prevent mutual interference.
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
compass
CV-295
0.80 m
Do not allow warm water or any other
liquid other than seawater or
freshwater to contact the transducer.
The transducer may become damaged.
Do not turn on the power when the
transducer is in air.
The transducer may become damaged.
Do not install the transducer where
noise or air bubbles is present.
Performance will be affected.
Steering
compass
0.50 m
ii
CAUTION
The transducer cable must be
handled carefully, following the
guidelines below.
• Keep fuels and oils away from the
cable.
• Locate the cable where it will not be
damaged.
• The cable sheath is made of chloro-
phrene or polychloride vinyl, which
are easily by damaged plastic
solvents such as toulene. Locate the
cable well away from plastic
solvents.