Furuno FCV-295 Installation Manual page 27

Setting for dual frequency transmitting
1. Set the XDCR SELECT menu as follows (see page 11 and 12).
Setting for "HF" connection Setting for "LF" connection
2. Press the [PWR] key to turn the power off, and turn it on again.
3. Press the MENU key to show the menu.
4. Select [Sounder] and press the ENTER key.
5. See the section "1.19.1 Sounder menu" in the Operator's Manual for how to set "Freq Choice"
and "Freq Control" for high and low frequencies.
AP-2