Table of Contents
Advertisement
Chapter 5 Preparation
5-4-3
When using a wireless
receiver
When using an externally connected wireless
receiver
Attach the wireless receiver when a wireless system is to be
used.
1
Attach the wireless receiver to the camera attachment.
2
Align the grooves in the camera attachment with the pins
on the battery case, etc. to attach the wireless receiver.
Wireless receiver
AUDIO IN connectors
AUDIO IN switches
3
Connect the AUDIO IN connectors on the camera with
the wireless receiver using the XLR cable.
4
Set the AUDIO IN switch or switches for the channel or
channels to which the XLR cable has been connected to
"REAR."
5
Set the LINE/MIC/+48V selector switch on the rear panel
to "MIC."
When detaching the wireless receiver, push up the lever
on the bottom panel of the camera attachment to
disengage it.
<Note>
For details on the operations and other aspects of the
wireless receiver, refer to the operating instructions which
accompany the receiver.
Audio output connectors
Camera attachment
XLR cable
When using a UniSlot® wireless receiver
1
Remove the slot cover, insert the wireless receiver, and
screw it down.
2
Set the AUDIO IN switches to WIRELESS for the audio
channels whose audio signals are to be recorded.
5-4-4
When using an audio
component
1
Connect the AUDIO IN connectors on the camera with
the audio component using the XLR cable.
2
Set the AUDIO IN switch or switches for the channel or
channels to which the audio component has been
connected to "REAR."
3
Set the LINE/MIC/+48V selector switch on the rear panel
to "LINE."
AUDIO IN switches
5
LINE/MIC/+48V
selector switch
AUDIO IN connectors
65
Hide quick links:
Advertisement
Table of Contents
