Radio To Radio Cloning - Baofeng uv-82 Operating Manual

Radio to Radio Cloning

The Baofeng UV-82 is capable of cloning between radios. This means if there is one radio configured in a certain manner, the
settings can be cloned onto another radio to ensure it is exactly the same. This is done by connecting a Reference (Master) radio
to a Copy (Slave) radio by hooking a cable between the two and copying the information over.
Procedure: Cloning Radios
1. Attach the cloning cable to both the Reference and Copy radios by inserting the adapters into each radio's respective
accessory cable ports.
2. Turn on the Copy radio (the radio that is being cloned to).
3. Turn on the Reference radio (the radio that is being cloned from) while holding down the [MONI] button.
4. The Reference radio should show COPYING in the display, and if the connection is successful, the LED will start flashing
red to indicate data transfer. The Copy radio's LED should be flashing green at the same time to indicate that it is
receiving data.
5. When the LEDs on both radios turn off, the radios will restart, and the cloning operation will be completed.
http://www.baofengradio.us
http://baofengradio.us
37