Tone Scanning - Baofeng uv-82 Operating Manual

Tone Scanning

You can scan for CTCSS tones and DCS codes on active frequencies in frequency mode.
To scan for CTCSS or DCS on active channels, follow these steps:
Procedure: Tone Scanning
1. Press the [MENU] button to enter the menu.
2. Enter either of the following on the numeric keypad.
a. Enter [1] [0] on the numeric keypad to scan for DCS codes.
b. Enter [1] [1] on the numeric keypad to scan for CTCSS sub-tones.
3. Press the [MENU] button to select.
4. Press the [SCAN] button momentarily.
5. CT or DCS will start flashing in the display as the radio starts scanning. Once it finds a tone or code in use, it will beep
and stop flashing, indicating that a tone or code has been found.
6. Press the [SCAN] button to confirm.
7. Press the [EXIT] button to exit the menu.
http://www.baofengradio.us
http://baofengradio.us
25