Table of Contents
Advertisement
press [MENU] key.
4. Press [
]/[
] key to "Radio active", then press [MENU] key to select
5. The screen displays "Radio active" <User alias or ID>, the LED
indicator light is red.
6. Wait for confirmation
7. "Radio active success"displays if it is successful, and "Radio active
fail" displays if fails.
Receive radio activation
After receiving the radio activation command, send activation tone,
re-shutdown and then boot. It can also be activated by writing frequency
software.
Note: This function works only if the function is set and turned on by
writing-frequency software.
Radio remote kill
In digital mode, you can send a remote inhibit command to a contact, so
that the radio can't be used normally.User menu function：
Initiate remote kill
1. Press [MENU] key to enter the menu mode
2. Press [
]/[
] key to contact list, then press [MENU] key to select
3. Press [
]/[
] key to the desired user alias or ID, then press
[MENU] key to select.
Or press [
]/[
] key to manually dial, then press [MENU] key to
select, flashing cursor appears, input the user ID you want to call, then
press [MENU] key.
49
4. Press [
]/[
] key to "Radio kill" , then press [MENU] key to select
5. The screen displays "Radio kill" <User alias or ID>, the LED indicator
light is red.
6. Wait for confirmation
7. "Radio kill success" displays if it is successful, and "Radio kill fail"
displays if fails.
Receive remote kill
After receiving the radio inhibit command, send inhibit prompt tone, and
press the [PTT] button to display "Transmission failed and inhibited" . It
can be activated by SMS writing frequency or wake-up.
Note: This function works only if the function is set and turned on by
writing-frequency software.
Group call from the contact lists
1. Press [MENU] key to enter the menu mode.
2. Press [
]/[
] key to contact list, then press [MENU] key to select,
3. Press [
]/[
] to the desired group name or ID.
4. Hold the walkie talkie in its upright position and keep it at a distance
of 1 to 2 inches (2.5 to 5.0 cm) from the mouth.
5. Press [PTT] key to initiate a call, LED indicator light is red. The screen
displays the talk group alias or ID, as well as the group call icon.
6. Release the [PTT] key to receive. When any user in the group
responds, the LED will light green. You will see the group call icon user
ID on the screen.
7. If the "Channel Idle Tone" feature is enabled, when the target radio
releases the [PTT] key, you will hear a short beep indicating that the
50
Hide quick links:
Advertisement
Table of Contents
