Advanced Topics; Using The Menu System Basic Use; Using Shortcuts - Baofeng uv-82 Operating Manual

Advanced Topics

For a complete reference on menu items, see section IV: Menu Definitions.
Note: For radios set to Memory Mode (MR) the following menu items will not take effect:
STEP, TXP, W/N, CTCSS, DCS, S-CODE, PTT-ID, BCL, SFT-D, OFFSET, MEM-CH, BAND.
Using the Menu System
Basic Use
Procedure: Using the Menu with Arrow Buttons
1. Press the [MENU] button to enter the menu.
2. Use the [UP] and [DOWN] to navigate between menu items.
3. Once the desired menu item is found, press [MENU] again to select that menu item.
4. Use the [UP] and [DOWN] buttons to select the desired parameter.
5. When the parameter is selected you want to set for a given menu item, you can press the [MENU] button to confirm
the setting or press the [EXIT] button to reset that menu item and exit the menu system.
6. To exit out of the menu at any time, press the [EXIT] button.

Using Shortcuts

Every menu item has a numerical value associated with it, and these numbers can be used for direct access of any given menu
item. To see which numerical value is associated with each menu item, go to Section IV: Menu Definitions. The top ten most
common features are also the top menu functions, and these are printed on the keypad for easy reference.
Procedure: Using the Menu with Shortcuts
1. Press the [MENU] button to enter the menu.
2. Use the numerical keypad to enter the number of the menu item.
3. To enter the menu item, press the [MENU] button.
4. For entering the desired parameter, the arrow buttons can be used to scroll through options, or use the numerical
shortcuts to access specific menu items.
5. When the parameter you want to set for a given menu item is selected, the [MENU] button can be pressed to confirm
the setting or press the [EXIT] button to reset that menu item and exit the menu system.
6. To exit out of the menu at any time, press the [EXIT] button.
http://www.baofengradio.us
http://baofengradio.us
23