Advanced Operation - Baofeng Pofung UV-6R Operating Instructions Manual

▲▼
10.- 1750 Hz TONE FOR ACCESS TO REPEATERS:
The user needs to establish long distance communications through an amateur radio repeater
which is activated after receiving a 1750 Hz tone. Press and hold on the 【PTT】,then press the
【BAND】button to transmit a 1750Hz tone.
11.- BASIC OPERATION:
11.1.-RADIO ON-OFF/VOLUME CONTROL :
-Make sure the antenna and battery are installed correctly and the battery charged.
-Rotate the knob clockwise to turn the radio on, and rotate the knob fully counter-clockwise until a
'click' is heard to turn the radio off. Turn the knob clockwise to increase the volume, or counter-
clockwise to decrease the
11.2.- SELECTING A FREQUENCY OR CHANNEL:
-
Press the key 【 ▲ 】 or 【 ▼ 】 to select the desired frequency/channel you want.
shows the frequency / channel selected.
-Press and hold down the key 【▲】or 【▼】for frequency up or down fast.
Note:
- You can not select a channel if not previously stored.

12-ADVANCED OPERATION

You can program your transceiver operating in the setup menu to suit your needs or preferences.
12.1.-SET MENU DESCRIPTION:
Menu Function/Description
0 SQL (Squelch level)
1 STEP(Frequency step)
2 TXP(Transmit poter)
3 SAVE( Batery saae,1:1/1:2/1:3/1:4))
L
volume.(开机图)
:
Keypad lock function activated.
Low transmit power.
Operation frequency.
Signal Strength Level.
The display
Available settings
0-9
2.5/5/6.25/10/12.5/25kHz
HIGH/LOW
OFF/1/2/3/4)