Scene File Screen; Camera Setup Screen - Panasonic AG-DVC30 Operating Instructions Manual

Menu configuration

SCENE FILE screen

Item/
(Display
Description of settings
mode)
SCENE FILE Settings corresponding to four shooting
(CAMERA) conditions are saved as scene files in this
camera-recorder. Use this item to select the
scene file to be used.
1. SCENE1:
The settings of various menu items were
stored in this file at the factory.
2. SCENE2:
The settings of various menu items were
stored in this file at the factory.
3. B.PRESS:
This file is useful for shooting dark areas
with a sharper contrast.
4. MOVIE-LIKE:
This file is useful for shooting movie-like
images.
<Note>
You can change the settings in the scene
files using the SETTING item.
SETTING Use this to change the settings in the scene
(CAMERA) files.
DETAIL LEVEL:
–7 --- 0 --- +7
Set this level in the "–" direction to soften
the image outlines.
When it is set in the "+" direction, the
image outlines are emphasized and
sharp images are produced, but the
amount of noise is increased slightly.
CHROMA LEVEL:
–7 --- 0 --- +7
Set this level in the "–" direction to make
the image colours lighter.
Set it in the "+" direction to make them
darker.
CHROMA PHASE:
–7 --- 0 --- +7
Use this to adjust the hue.
COLOUR TEMP:
–7 --- 0 --- +7
Set this in the "–" direction to make the
images more reddish overall.
Set it in the "+" direction to make the
images more bluish overall.
MASTER PED:
–15 --- 0 --- +15
Set this in the "–" direction to make the
images darker overall. When a setting
below –5 is selected, the dark parts of
the images may become blackened out.
When it is set in the "+" direction, the
dark parts of the images (such as the
shadows) become brighter.
AE SHIFT:
–4 --- 0 --- +4
Use this to adjust the auto iris setting.
Set it in the "–" direction for a darker
setting.
Set it the "+" direction for a brighter
setting.
72 (E)
(cont.)
NAME EDIT
(CAMERA)
SAVE/INIT
(CAMERA)
SYNCRO
SCAN
(CAMERA)
ASPECT
CONV
(CAMERA)
The underlining indicates the factory setting.
Item/
(Display
Description of settings
mode)
SKIN TONE DTL:
OFF, ON
When ON is selected, soft skin tones are
reproduced when people are shot,
making them look more attractive.
REC MODE:
NORM
Shooting is performed using field
recording (50 fields per second).
FRAME
Shooting is performed using frame
recording (25 frames per second).
High-quality images can be obtained at
this setting when playing back still
images, for example.
Use this to edit the name of the selected
scene file.
SAVE:
The changed settings in the scene file
(one of the files listed in the file selection
item) are saved.
The original scene file settings will be
restored when the menu mode is
released, the operation is switched to the
VCR mode or when the power is turned
off if SAVE has not been selected.
INITIAL:
The selected scene file settings are
returned to the factory settings.

CAMERA SETUP screen

Item/
(Display
Description of settings
mode)
Use this to adjust the synchro scan shutter
speed used for shooting images on a TV
screen, etc. (P42, P43)
1/50.2 --- 1/248
Use this to select the aspect ratio of the
images which are to be recorded. (P39)
NORMAL, LETTER BOX, SQUEEZE