Audio Dubbing - Panasonic AG-DVC30 Operating Instructions Manual

Audio dubbing

Background music or narration can be added to
the images you have recorded on the tape.
(P55, P56)
1
Turn the POWER lever to set the camera-
recorder to the VCR mode.
CAMERA
VCR
POWER
2
Using the menus (P67-P70), select the audio
recording system at the AUDIO REC item on
the RECORDING SETUP screen. (P75)
32K (12bit):
The sound is recorded using the 12-bit/32kHz (4-
channel) system.
Use this mode when you want to keep the sound that
was heard while you were shooting even after audio
dubbing has been performed.
48K (16bit):
The sound is recorded using the 16-bit/48kHz system
(2 channels with a good sound quality).
When audio dubbing is performed, the sound that was
heard while you were shooting will be erased.
3
Select the sound to be recorded using the A
DUB INPUT item on the AV IN/OUT SETUP
screen. (P77)
MIC:
The sound of the built-in or external microphone is
recorded.
A_IN:
The sound of the audio component connected to the
AV IN/OUT jack is recorded.
4
Find the scene where the sound is to be
added, and set the camera-recorder to the
still-picture playback mode. (P50)
RESET
SEARCH DIGITAL ZOOM SEARCH
REC BARS PHOTO SHOT
COUNTER RESET MODE CHK ZEBRA OIS
AUTO MANUAL
1
C B
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX STOP INDEX
? ?
5
Press the A.DUB button on the remote
control unit to establish the status ready for
audio dubbing.
COUNTER RESET TITLE
ZOOM
MULTI/
P-IN-P REC A.DUB
C B
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
6
Press the PAUSE button ( ; ) on the remote
control unit and start input of the sound to be
dubbed.
C B
/REW PLAY FF/
STILL ADV PAUSE STILL ADV
INDEX STOP INDEX
7
When the PAUSE button ( ; ) on the remote
control unit is pressed, the camera-recorder
reurns to the still-picture playback mode.
If more sound is to be dubbed, repeat steps
5 6
and .
8
When the STOP button ($) on the remote
control unit is pressed, audio dubbing is
stopped.
When the AUDIO DUB (sound adding)
function is allocated to a USER button on the
camera-recorder, audio dubbing can be
performed (sound can be added) by operating
that button in the same way as the PAUSE
button ( ; ) on the remote control unit.
USER1 button
ENGLISH
? ?
1
USER2 button
USER3 button
57 (E)