Panasonic AG-DVC30 Operating Instructions Manual page 76

Menu configuration
RECORDING SETUP screen
Item/
(Display
Description of settings
mode)
TCG Use this to set the mode in which to
(CAMERA) advance the time code.
(VCR) FREE RUN:
The time code is advanced continuously
regardless of the operation mode.
It is recorded on the basis of the time
appearing on the camera-recorder's
calendar clock.
REC RUN:
The time code is advanced only when
recording is underway.
It is recorded while ensuring that
continuity is maintained with the time
code already recorded on the tape when
shooting with frame-to-frame continuity.
FIRST REC TC Use this to select the time code to be
(CAMERA) recorded when recording is started.
(VCR) REGEN:
Select this to record the time code that
will ensure continuity with the time code
already on the tape.
The time code is recorded in the REC
RUN mode regardless of the setting
selected for the TCG item.
PRESET:
Select this to record the time code using
the value selected by the TC PRESET
item as the initial value.
However, when shooting with frame-to-
frame continuity has taken place, the
time code is recorded to ensure
continuity with the time code already on
the tape.
TC PRESET Use this to set the initial value of the time
(CAMERA) code to be recorded.
(VCR) The item takes effect when "PRESET" has
been selected as the FIRST REC TC item
setting.
1394 UB Use this to select the user's bit to be
REGEN recorded when recording the signals of the
(VCR) unit connected to the DV connector.
OFF:
The user's bit selected by the UB MODE
item is recorded.
ON:
The user's bit of the signals input to the
DV connector is recorded.
O When "ON" has been selected as this
item's setting, it takes precedence over
the UB MODE item setting.
O If the signals do not contain the user's bit
information, the user's bit is not
recorded.
O If no signals are input to the DV
connector, the UB MODE item setting is
used for the recording.
76 (E)
(cont.)
UB MODE
(CAMERA)
(VCR)
UB PRESET
(CAMERA)
(VCR)
ONE-SHOT
REC
(CAMERA)
REC TIME
(CAMERA)
The underlining indicates the factory setting.
Item/
(Display
Description of settings
mode)
Use this to set what is to be recorded as
the user's bit.
USER:
The user's information is recorded.
TIME:
The recording time is recorded.
DATE:
The recording date is recorded.
TCG:
The time code is recorded.
Use this to set the user's bit.
For this, however, "USER" must have been
selected as the UB MODE item setting.
Use the ON setting when shooting on a
frame-by-frame basis.
OFF:
Frame-by-frame
performed.
ON:
The camera-recorder is set to the frame-
by-frame shooting mode.
When the START/STOP button is
pressed, recording proceeds for the
number of seconds selected by the REC
TIME item setting, and then the camera-
recorder is set to the REC PAUSE
mode.
Use this to set the recording time for frame-
by-frame shooting.
0.5s : 0.5 sec.
1.5s : 1.5 sec.
shooting is not
1s : 1.0 sec.
2s : 2.0 sec.