3-12. Connecting the power plug
CAUTION
:
To prevent possible accidents caused by leakage or dielectric strength, an appropriate power plug
shall be installed by a person who has an expert knowledge of electricity. Be sure to connect the
power plug to the receptacle that is well grounded.
Connection of the power plug to the power depends on the specifications of the product. Adjust the power
plug to the power specifications to connect.
① In case of the product of single-phase, 200 to 240V specifications (CE specifications) :
Connect the sky-blue and brown wires of the power cord to the power terminal (AC200 to 240V) and the
yellow/green wire to the ground (earth) terminal respectively.
② In case of the product of single-phase, 200 to 240V specifications (other than CE specifications) :
Connect the black and white wires of the power cord to the power terminal (AC 200 to 240V), and the
yellow/green wire to the ground (earth) terminal respectively.
③ In case of the product of 3-phase, 200 to 240V specifications :
Connect the red, white and black wires of the power cord to the power terminal (AC200 to 240V) and the
yellow/green wire to the ground (earth) terminal respectively.
– 12 –