Erasing Messages - Panasonic KX-TS620W Operating Instructions Manual

Answering System

Erasing Messages

The unit will announce the remaining recording time after playback, if it is less than
3 minutes. New messages cannot be recorded when:
— "Memory full" is heard.
— "Message full" is displayed.
— The MESSAGE indicator flashes rapidly (only when the Answering System is
on).
Erase some, or all, of the messages. We recommend you erase unnecessary
messages after each playback.
Erasing a specific message
Press {ERASE} while the message you want to erase is being played.
• The unit erases the message.
• A short beep will sound and the unit will continue to play the next message.
Erasing all messages
All recorded messages, except the greeting message, can be erased at one time.
1
Press {ERASE}.
• "To erase all messages press ERASE
again" is heard.
2
Within 10 seconds, press
{ERASE} again.
• A long beep sounds and "No message"
is heard. The display shows "
message
".
• The information in the Caller List will not be erased. To erase Caller List information, see
page 30.
46
For assistance, please visit http://www.panasonic.com/phonehelp
MESSAGE Indicator
{ERASE}