Calling Back From The Caller List; Editing The Caller's Phone Number - Panasonic KX-TS620W Operating Instructions Manual

Calling Back from the Caller
List
1
Press { 4 } or {
Caller List.
2
Scroll to the desired caller by
pressing {
4
• To exit the Caller List, press {EXIT}
or wait for 60 seconds.
3
Lift the handset or press
{SP-PHONE/HEADSET}.
12 34PM NOV.
123456789
• The displayed phone number is
dialed automatically.
• After a few seconds, the display will
show the length of the call.
• In some cases, you may have to edit the
number before dialing (see below).
• If a phone number is not displayed in the
caller information, you cannot call back
that caller.
Editing the Caller's Phone
Number
You can edit a phone number in the
Caller List by removing its area code
and/or the long distance code "1".
Once you call back and edited number,
this unit can automatically edit
incoming phone numbers from the
same area code in the Caller List and
each time you receive a call (Caller ID
Number Auto Edit, page 14).
1
Press { } or {
4
Caller List.
2
Scroll to the desired caller by
pressing {
4
3
Press {FUNCTION/EDIT}.
For assistance, please visit http://www.panasonic.com/phonehelp
3 } to enter the
} or {
3
}.
: 25
} to enter the
3
} or {
3
}.
4
Press {FUNCTION/EDIT}.
repeatedly until the number is
shown in the desired format.
• Each time you press {FUNCTION/
EDIT}, the number is rearranged
into one of 3 patterns.
a Phone no.
b
Area code
—
c
1 Area code
• The order of which pattern a
are displayed depends on how the
telephone number is displayed in
step 2.
444-7777
a
 
111-444-7777
b
 
1-111-444-7777
c
 
5
After editing, you can continue
with calling back or storing
procedures.
To call back, lift the handset or
press {SP-PHONE/HEADSET}.
To store the number in the
Phonebook memory, follow steps
4 to 5 on page 28 to complete
the operation.
To store the number in the Direct
Dial memory, follow steps 4 to 6
on page 29 to complete the
operation.
• To exit the Caller List during editing, press
{EXIT} or wait for 60 seconds.
• The number edited in step 3 will not be
maintained in the Caller List.
Caller ID Service
—
Phone no.
—
Phone no.
—
[OK]=Next
{FUNCTION/EDIT}
[OK]=Next
{FUNCTION/EDIT}
[OK]=Next
{FUNCTION/EDIT}
c
27