Answering System Settings - Panasonic KX-TG6700AL Operating Instructions Manual

Turning on the answering system
remotely
If the answering system is off, you can turn
it on remotely by calling the selected line in
"Turning the answering system on" on
page 38.
1
Dial your phone number.
2
Let the phone ring 15 times.
L The unit answers your call with the
greeting message.
L You can hang up, or if you call from a
touch tone phone, you can enter your
remote code and begin remote
operation (page 43).
Skipping the greeting message to leave
a message
You can leave a message just as any
outside caller can. Call your phone
number. When the answering system
picks up, press {*} to skip the greeting
message and record your message after
the beep.
Answering System
Answering system
settings
Ring count
You can change the number of times the
phone rings before the unit answers calls.
The default setting is "4".
"Toll saver": The unit answers on the
2nd ring when new messages have been
recorded, and on the 4th ring when there
are no new messages. If you call your
phone from outside to listen to new
messages (page 43), you will know that
there are no new messages when the
phone rings for the 3rd time. You can then
hang up without being charged for the call.
Handset
1
{MENU} i {0}{6}{1}
2
Select the desired line.
3
Select the desired setting. i {SAVE}
i {OFF}
For Service Provider Voice Mail
Subscribers
To receive Voice Mail and use answering
system properly, please note the following:
L "Voice Mail" is a service provided by
your service provider/telephone
company. You will need to first subscribe
or activate this service through your
service provider/telephone company.
Consult your service provider/telephone
company on how to operate this service
and how you will be notified that you
have messages on your Voice Mail.
To use this service you will be required
45