Url Filter Screen - ZyXEL Communications LTE4506-M606 User Manual

Table 27 Router > Firewall > IPv6/Port Filter
LABEL
IPv6/Port
Filtering Policy
IPv6/Port Filter List
Add New
Source IP
Port
Protocol
Dest. IP
Port
Comment
Action
Apply
Reset

6.8 URL Filter Screen

Use this screen to block the users on your network from accessing certain web sites. To access this
screen, click Router > Firewall > URL Filter.
Chapter 6 Router
DESCRIPTION
Select Whitelist to allow packets that match the filtering rules defined on this screen to
pass through. Select Blacklist to block packets that match the filtering rules defined on this
screen.
Click Add New to create a new rule.
This field displays the rule index number.
This field displays the source IPv6 addresses to which this rule applies.
This field displays a single port number of the source or a port range.
Enter the port number/range of the source that define the traffic type, for example TCP port
80 defines web traffic.
This field displays the protocol (TCP, UDP, TCP+UDP or any) used to transport the packets
for which you want to apply the rule.
This field displays the destination IPv6 addresses to which this rule applies.
This field displays a single port number of the destination or a port range.
Enter the port number/range of the destination that define the traffic type, for example TCP
port 80 defines web traffic.
Enter descriptions of the rule in this field.
Click Edit to go to the screen where you can edit the filtering rule.
Click Delete to remove the filtering rule.
Click this button to save your changes back to the LTE4506.
Click Reset to reload the previous configuration for this screen.
LTE4506 User's Guide
58