Panasonic KX-TEM824 User Manual page 16

1.1 Before Operating a Telephone
CONF (Conference):
Used to establish a 3-party or 5-party
conference call.
FWD/DND (Call Forwarding/Do Not
Disturb):
Used to set the FWD or DND feature for
the extension.
Navigator Key, Volume Key:
Used to adjust the volume of the speaker,
handset and headset, and the display
contrast, or to select desired items.
Customised Buttons
Throughout this manual, when the name of a button is written in parentheses, such as "(G-CO)", this means
that it is a flexible button that has been customised. To customise flexible buttons, refer to "3.1.3 Customising
the Buttons".
Customised Button
Single-CO (S-CO)
Group-CO (G-CO)
Other-CO (O-CO)
Direct Station Selection (DSS)
One-touch Dialling
Message
Message for another extension Used to access voice messages stored for another extension.
FWD/DND (Call Forwarding/
Do Not Disturb)
Save
Conference
Log-in/Log-out
Extension Lock
Day
16 User Manual
Used to access a specified outside (CO) line for making or receiving calls.
Used to access an idle outside (CO) line in a specified outside (CO) line group
for making calls. Incoming calls from outside (CO) lines in the assigned outside
(CO) line group arrive at this button.
Used to access an idle outside (CO) line for making calls. Incoming calls from
the assigned outside (CO) lines, which are not assigned to S-CO or G-CO
buttons, arrive at this button.
Used to call an extension with a one-touch operation.
Used to call a preprogrammed party or access a feature with a one-touch
operation.
Used to leave a message waiting indication, call back the party who left the
message waiting indication, or play back voice messages.
Used to set the FWD or DND feature for the extension.
Used to store a telephone number while in a conversation with an outside
party or while hearing a busy tone, and then easily redial the number later.
Used to establish a 3-party or 5-party conference call.
Used to switch between Log-in and Log-out status.
Used to remotely lock or unlock another extension.
Used to change the time service mode to day mode.
VOICE CALL:
Used to answer an intercom call
automatically.
PROGRAM:
Used to enter and exit programming
mode.
Programmable Feature (PF):
Located in the right column of the CO
(PF)
button array on certain telephones or on
the DSS Console. Used to access a
preprogrammed feature. Mostly used as a
One-touch Dialling button.
Function