Dell S2830dn User Manual page 108

Troubleshooting
Change [paper source] to [paper type] [paper size] load [orientation]
Try one or more of the following:
•
Load the correct size and type of paper in the tray, and then press
Note: Make sure the paper size and type settings are specified in the Paper menu on the control
panel.
•
Select Use current [paper source] on the control panel to clear the message and continue printing
using the current size and type of paper in the tray.
•
Cancel the print job.
Complex page, some data may not have printed [39]
Try one or more of the following:
•
From the printer control panel, press
•
Reduce the number and size of fonts, the number and complexity of images, and the number of pages
in the print job.
•
Cancel the print job.
•
Install additional printer memory.
Some held jobs were not restored [57]
From the control panel, press
Defective flash detected [51]
Try one or more of the following:
•
Replace the defective flash memory card.
•
From the printer control panel, press
•
Cancel the current print job.
Incorrect paper size, open [paper source] [34]
Note: The paper source can be a tray or a feeder.
Try one or more of the following:
•
Load the correct size of paper in the paper source.
•
From the control panel, press
•
Check the length and width guides of the paper source and make sure the paper is loaded properly.
•
Make sure the correct paper size and type are specified in the Printing Preferences or in the Print dialog.
•
Make sure the paper size and type are specified in the Paper menu on the control panel.
to clear the message and continue printing.
to clear the message and continue printing.
to ignore the message and continue printing.
to clear the message and print using a different paper source.
on the control panel.
108