Panasonic KX-FLB811 Operating Instructions Manual page 65

Feature/Code
Setting the ring pattern for
fax (Distinctive Ring
feature)
{#}{4}{3}{1}
Receiving other size
documents
{#}{4}{3}{2}
Changing the fax
activation code
{#}{4}{3}{4}
Setting the memory
reception alert
{#}{4}{3}{7}
Setting friendly reception
{#}{4}{3}{8}
Setting the output tray to
use for faxing
{#}{4}{4}{1}
(KX-FLB811 only)
Selection
{1} "A"
{2} "B"
{3} "C"
{4} "D"
{5} "B-D" (default)
See page 43 for details.
To receive a fax document that is longer than your recording paper.
{0} "OFF": The unit will print the original size.
{1} "ON" (default): The unit will fit received documents onto your
recording paper.
If you wish to use an extension telephone to receive faxes, activate this
feature and program the activation code.
Important:
L The fax activation code must be different from the code that
you programmed on the answering machine.
{0} "OFF"
{1} "ON" (default)
1. Press {MENU}.
2. Press {#}, then {4}{3}{4}.
3. Press {1} to select "ON".
4. Press {SET}.
5. Enter your code from 2 to 4 digits, using 0–9, {*} and {#}.
L The default code is ";#9".
L Do not enter "0000".
6. Press {SET}.
7. Press {MENU}.
To alert you with a beeping sound when a received fax document is
stored into memory due to some existing problem.
The slow beeps will continue until you clear the printing problem and
make sure the unit is supplied with enough paper to print the stored
document.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will be alerted to a reception problem by a
beeping sound.
To receive a fax automatically when you answer a call and hear a fax
calling tone (slow beep).
{0} "OFF": You have to press {START} for fax reception.
{1} "ON" (default): You do not have to press {START} for fax
reception.
You can select the output tray that will be used for printing received
faxes.
{1} "#1": Upper output tray (Up to approx. 100 sheets).
{2} "#2" (default): Lower output tray (Up to approx. 50 sheets).
Note:
L Lists or reports printed by pressing {HELP} (page 23) or {MENU}
(page 89) will be stacked on the upper output tray.
8. Programmable Features
63