Panasonic KX-FLB882CX Operating Instructions Manual page 79

Problem
I cannot hear a dial tone.
I cannot make calls.
The unit does not ring.
The other party complains
they only hear a fax tone and
cannot talk.
The {REDIAL} or {PAUSE}
button does not function
properly.
The receiving mode does not
function properly.
I cannot receive a fax
document on the computer.
The unit does not display the
caller's name and/or
telephone number.
Cause & Solution
L The telephone line cord is connected to the [EXT] jack on the unit. Connect
to the [LINE] jack (page 17).
L If you use a splitter/coupler to connect the unit, remove the splitter/coupler
and connect the unit to the wall jack directly. If the unit operates properly,
check the splitter/coupler.
L Disconnect the unit from the telephone line and connect a known working
telephone. If the working telephone operates properly, contact our service
personnel to have the unit repaired. If the working telephone does not
operate properly, contact your telephone company.
L The power cord or telephone line cord is not connected. Check the
connections (page 17).
L If you connected the unit through a computer modem, connect the unit
directly to a telephone line jack.
L The dialling mode setting may be wrong. Change the setting (feature #120
on page 18).
L The ringer volume is turned OFF. Adjust it (page 21).
L FAX ONLY mode is set. Tell the other party the number is only used for
faxes.
L If you use a Distinctive Ring service, make sure you have set the same ring
pattern assigned by the telephone company (page 53).
L If this button is pressed during dialling, a pause will be inserted. If pressed
immediately after a dial tone is obtained, the last number dialled will be
redialled.
L Distinctive Ring is set (feature #430 on page 53).
L Make sure the following features are set beforehand.
– PC fax reception (feature #442 on page 61)
– Computer setting for the PC fax reception (feature #443 on page 23)
L For New Zealand users:
Your unit is connected to a telephone line with ADSL (JetStream) service.
We recommend that you contact your ADSL service provider to have an
ADSL Splitter installed. We do not recommend the use of generic ADSL
filters.
11. Help
79