Cisco WS-C2950-24 Hardware Installation Manual page 55

Chapter 2 Installation
•
•
•
Figure 2-1
Follow the same steps to attach the second bracket to the opposite side of the
switch.
Figure 2-1
Phillips flat-head
78-11157-02
When mounting a Catalyst 2950G-48-EI switch in a 19-inch rack, use three
of the Phillips flat-head screws to attach the long side of the 19- or 24-inch
bracket to the switch. See
When mounting a Catalyst 2950G-24-EI-DC switch in a 23-inch rack, use
two of the Phillips truss-head screws to attach the 23-inch bracket to the
switch. See Figure 2-7,
When mounting a switch in a 24-inch rack, use two of the Phillips truss-head
screws to attach the 19- or 24-inch bracket to the switch. See
Figure 2-11, and Figure
to Figure 2-12
Attaching Brackets on the Switch in a 19-Inch Rack (Front Panel
Forward)
Number-8
screws
Catalyst 2950 Desktop Switch Hardware Installation Guide
Figure 2-4, Figure
Figure 2-8, and Figure
2-12.
show how to attach a bracket to one side of the switch.
S Y S T
R P S
S TA T
U T IL
D U P L X
S P E E D
M O D E
Installing the Switch in a Rack
2-5, and Figure 2-6.
2-9.
Figure
1 x
2 x
3 x
4 x
2-10,
5 x
2-11