Cisco WS-C2950-24 Hardware Installation Manual page 70

Connecting to DC Power
An exposed wire lead from a DC-input power source can conduct harmful
Warning
levels of electricity. Be sure that no exposed portion of the DC-input power
source wire extends from the terminal block plug.
Figure 2-21 Inserting Wires in the Terminal Block Plug
Use a ratcheting torque screwdriver to torque the terminal block captive screw
Step 5
(above the installed wire lead) to 4.5 lbf-in. (72 ozf-in.). (See
Do not overtorque the terminal-block captive screws. The recommended
Caution
maximum torque is 4.5 lbf-in.
Catalyst 2950 Desktop Switch Hardware Installation Guide
2-26
Chapter 2
Return
Feed A
Negative
Return
Feed B
Negative
Figure
Installation
2-22.)
78-11157-02