Password Transmission - Panasonic DP-4530 Operating Instructions Manual

Password Transmission

To utilize the Password-protected Transmission feature, follow the steps below.
You must set the password (4-digit) in the Function Parameter "43 Password-Transmit" (Fax/Email Settings >
Fax Parameters) in advance.
1
Place original(s).
Refer to Placing Originals (Facsimile/
Internet Fax) in the Operating Instructions
(For Basic Operations) of provided booklet.
2
Press the Fax key.
3
Select "More Menus".
4
Select "Select Mode".
5
Select "Password XMT".
6
Select "On", and then select "OK".
7
Set "Quality Adj." as required.
Refer to Setting Original Quality (see page
30).
8
Select a destination.
Refer to Entering a Destination (see page
16).
Select an address, except the address
registered for Relayed transmission.
9
Press the Start key.
Password-protected transmission starts.
The transmission fails if the password of
both units does not match.
Select to perform
Password-protected
transmission.
Select not to perform
Password-protected
transmission.
77