Operation Chart; Common Features And Usage - Panasonic DP-2010E Operating Instructions Manual

Operation Chart

Common Features and Usage

Basic Operation
Original
Place the
Load Paper
Original
Turn the Power
Switch On
Position of the Original
From ADF (or i-ADF)
ADF Tray
Original Guides
Adjust to the original's width
Commonly Used Functions and Operating Procedures
Full Size
Makes a copy that is the same
size as the original
Reduction or Enlargement
Copies the original at a fixed
reduction or enlargement ratio
Memory Capacity
When the memory becomes full during original scanning, the message "OUT OF MEMORY"
"CONTINUE? 1: YES 2: NO" will be displayed in the message display. In this case, follow the
operating instruction in the message display.
When additional memory is required, consult with an authorized servicing dealer.
1 2
Original Size
(Reduction/
Enlargement
Only)
From Platen
Original Guide
INV
INV LTR LGL
INV
INV
LTR
LGL
LTR
LDR
1 4 5
1
3
Copy Size Number
(Reduction/ of Copies
Enlargement
Only)
C Place originals face down on the
platen or face up on the ADF.
LDR
C If the original is not positioned
properly, a portion of the original
may not be copied.
C For originals smaller than invoice
size, position the original within the
area of INVOICE and select invoice.
(See page 12)
2 3 4
4 5
Press
START
5
(See page 13)
3