Function Setting For Key Operator - Panasonic DP-2010E Operating Instructions Manual

Function

Function Setting for Key Operator

Changing the Paper Size
The Paper Trays are designed to accommodate Invoice, Letter, Letter R, Legal and Ledger size
paper. To change the paper size, perform the steps shown below.
1
2
34
Press the FUNCTION key.
Proceed as Follows:
FUNCTION MODE (1-2)
ENTER NO. OR ∨ ∧
# Press the 1 key to select GENERAL
FUNCTIONS.
1:GENERAL FUNCTIONS
PRESS SET TO SELECT
$ Press the SET key.
GENERAL PARAM. (0-9)
ENTER NO. OR ∨ ∧
% Press 9 key.
09 KEY OPERATOR MODE
ENTER PASSWORD=-
& Input the Key Operator ID code (3 digit)
and the SET key.
KEY OPR. MODE (00-25)
ENTER NO. OR ∨ ∧
FUNCTION Key
( Press 00 and 1 or 2 key to select
the PAPER SIZE.
00 PAPER SIZE
1:TRAY-1[LTRB]
) Press SET to select the paper tray and
press (G or F) keys to set the paper
size.
Paper size changes are as follows.
Letter R Invoice R
Letter
Legal
Ledger FLS2
* Press the SET key to set up the PAPER
SIZE.
+ Press the RESET key to exit the Function
mode.
A3 B4 A4
A4R
B5
FLS1 A5R B5R