Panasonic DP-2010E Operating Instructions Manual page 44

Digital imaging systems
Hide thumbs Also See for DP-2010E:
Table of Contents

Advertisement

Problem Solving
Adding the Toner and Replacing Toner Waste Container (? ? ? ? ? )
5
6
7
8
ATTENTION
44
2
1
1
2
2-1
2-3
2-2
Incorrect
Correct
C Do not reuse the toner from the Toner Waste Container.
# Shake the new Toner Bottle four
or five times to loosen the
contents.
$ Remove the cap from the Toner
Bottle.
# Align the Key of the bottle, also
represented by the Arrow mark
(Unlocked symbol
the end of the Toner Bottle with
the Arrow mark on the machine.
Note: To prevent toner spill,
ensure that the key is facing
upwards before installing the
bottle.
$ Insert the bottle as far as it will
go, then turn it clockwise (160°,
approx. 1/2 turn) until it locks
(Locked symbol ).
Note: If the bottle is not inserted
all the way into the machine
as illustrated, turn the bottle
slightly in either direction to
engage the key and try it
again.
Install a new Toner Waste
Container.
Close the Front Cover.
) visible on

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dp-1810pWorkio dp-1810fWorkio dp-2010Workio dp-1810

Table of Contents