Mode Functions - Panasonic DP-150FP Operating Instructions Manual

Mode Functions

12
Energy Saver Mode/Auto Off Mode
Energy Saver Mode
# To enter this mode
Press Energy Saver key. The indicator will flash.
Automatically activates after 15 minutes from the last copy.
$ To cancel this mode
Press Energy Saver key again.
Auto Off Mode
# Automatically activates after 30 minutes from the last copy.
Power consumption will drop and the Energy Saver key indicator will light.
$ To cancel this mode.
Press Energy Saver key.
If you wish to change the above settings or if you need more information, call your Panasonic
authorised dealer.
Normal Operation
Energy Saver Mode
Auto Off Mode
Toner Saver Mode
1) This only works when using copy mode. When printing out by Printer or Fax function, this
mode does not work.
2) The Toner Saving Mode is to save toner consumption by copying dark originals lighter.
The exposure indicator "LIGHT" flashes when Toner Saving Mode is on.
3) To enter this mode:
To cancel this mode:
Copy Reservation Function
While the copier is warming up, you may position your original on the copier, enter your
copy job selections and press the Start key. The Wait indicator (Start key) will flash until the
warm up cycle is completed and the copy job will automatically start.
Note: Please enter your copy job, when "WARM UP , PLEASE WAIT SELECT COPY JOB"
appears in message display.
Power Consumption
Approximately 60 Wh
Approximately 35 W
Approximately 1.5 W
# Press Copy Key
$ Press Function Key
% Press "4" key of Keypad
& Press Set Key.
( Select "TONER SAVER 2:VALID".
Press "2" key of Keypad
) Press Set Key.
# Press Copy Key
$ Press Function Key
% Press "4" key of Keypad
& Press Set Key
( Select "TONER SAVER 1:INVALID".
Press "1" key of Keypad
) Press Set Key.
Warm Up Time
None
5 seconds
25 seconds